blood tests

∙

5 minute read

What can cause errors in blood test results?

emily

Written by Emily Cameron

Updated

A gloved hand lifting a blood sample tube from a rack in a lab
Share:

In hospital labs, most blood test errors happen before the sample is tested.1,2 The blood clots, the red blood cells break down, there isn't enough blood, or the lab can't match the sample to you.3 Each problem has a few simple fixes.

At Numan, we offer a range of at-home blood tests, from our Complete Blood Test to a blood test for erectile dysfunction. You collect a small sample of blood at home, then post it back to our lab.4

Why has my blood sample clotted?

Blood clotting in response to an injury is an important and healthy process that ensures that you don’t lose too much blood. However, if the blood clots, even partially, before it is in the lab, the blood will not be able to be analysed.5

Many blood collection tubes contain an additive that stops the blood clotting.6 It has to be mixed in as soon as the tube is full. Without enough mixing, results can be inaccurate and the test may need repeating.7

How to avoid a clotted sample

  • Put the cap on the tube and press until you hear a click.4

  • Gently turn the tube upside down at least ten times.4,8

  • Don't shake it. Mixing too hard can damage the blood cells, which is the next problem on this list.4,9

What is a haemolysed blood sample?

A haemolysed sample is one where red blood cells have broken down.10 This can push some results up, such as potassium, and others down, such as glucose.9 The lab may not be able to report the tests it affects.5 In hospital labs, it's the most common reason a sample can't be used.1

Things that can damage the blood cells:

  • Squeezing your finger too hard.11

  • Pricking your finger before the alcohol wipe has dried.11

  • Shaking the tube, or mixing it too hard.9

  • Leaving the sample somewhere hot.9

How to avoid a haemolysed sample

  • Let your finger dry fully after the alcohol wipe.4

  • Massage your hand from the palm down towards your finger. Don't squeeze close to where you pricked it.4,8

  • Let the drops of blood fall into the tube.4,8

  • Keep your sample out of the heat, and post it on the day you take it.3,9

Why is my blood sample too small?

When you receive your at-home blood test, the vials provided will be marked with a line that you should fill them to. If there isn't enough blood, the lab can't run the tests.5,6

Why won't my blood come out?

Cold hands and slow blood flow make it harder to collect a good sample.11 A few steps can get your blood flowing.4

Before you start:4

  • Drink two glasses of water about half an hour before your test.

  • Soak your hand in warm water for four to five minutes.

  • Swing your arm in a circle ten times, then clench your fist ten times.

  • Stand up, with your hand lower than your elbow.

While you collect your sample:4

  • Press the lancet against the side of your fingertip.

  • If the tube takes more than two minutes to fill, warm your hand again. Then prick a different finger with a new lancet.

For more ideas, read our tips for taking a finger-prick blood test. The full steps for each kit are in our guide on how to take your at-home blood test.

Can missing details stop my sample being tested?

Yes. A lab won't test a sample it can't match to you.5 A missing personal details form is one of the reasons our lab can't process a sample.3

Before you post your kit, check that:4

  • The instruction leaflet is filled in.

  • The unique reference number is attached.

  • Everything is inside the return box.

What else can affect my blood test results?

Some things can change your results even when the sample itself is fine.9

  • Eating before the test: We ask you to take your test in the morning, after eight hours without food.4,9

  • Delays in reaching the lab: These can raise potassium, for example.9 Take your test from Monday to Thursday and post it on the day you take it.4

  • Time of day: For a testosterone blood test, take your sample before 11am.4

Your body also changes a little from day to day, so every result carries some natural variation.9

What happens if my blood test fails?

If our lab can't process your sample, contact our Customer Care team. You can ask for a replacement kit, free of charge.3

If finger-prick testing doesn't suit you, you can ask for a refund. You can also ask about other options, such as a blood test taken from a vein or the Tasso+ collection device.3

If it is your first time trying an at-home blood test, don’t worry, as many people have more success with their second attempt.

Blood test errors: your questions answered

Can blood tests be wrong?

Sometimes. In one study of a hospital lab in Italy in 2006, about 3 in every 1,000 results had a lab error.2 Most of those errors happened before the sample was tested.2

Can a clotted blood sample still be tested?

Usually not. A lab won't test a clotted sample, so you'd need to take a new one.3,5

Which finger is best for a finger-prick test?

Your ring finger is usually best.4 Use a finger on the hand you don't write with. If you're right-handed, that's your left hand.4,8

How long do blood test results take?

You should get your results three to five working days after you post your sample. We'll email you when they're in your Numan account. One of our clinicians also writes a review of your results, so you can understand what they mean.4

The numan take

Taking a finger-prick blood test at home is usually straightforward. Even so, the lab sometimes finds a problem with a sample. The common ones come down to how the blood is collected, mixed, packed, and posted.3,9 Warm hands, gentle mixing, and posting on the day you take it all make a difference.3,4 Always read the instructions before taking your at-home test, as they may vary between products.

Numan accurate blood test

Know what your blood knows.

Complete Blood Test

References

1. Lippi G, von Meyer A, Cadamuro J, Simundic AM. Blood sample quality. Diagnosis (Berl). 2019;6(1):25 to 31. doi:10.1515/dx-2018-0018. Narrative review of the literature on unsuitable blood samples in clinical labs.

2. Carraro P, Plebani M. Errors in a stat laboratory: types and frequencies 10 years later. Clin Chem. 2007;53(7):1338 to 1342. doi:10.1373/clinchem.2007.088344. Four hospital departments in Padova, Italy, three months in 2006: 160 confirmed errors among 51,746 analyses (3,092 per million). Preanalytical errors made up 61.9%.

3. Numan. Why couldn't my results be processed? [Internet]. Numan Help Center; 2026 Oct 9 [cited 2026 Nov 18]. Available from: https://help.numan.com/en/articles/9924924-why-couldn-t-my-results-be-processed

4. Numan. How to take your at-home blood test [Internet]. Numan; updated 2026 Nov 12 [cited 2026 Nov 18]. Available from: https://www.numan.com/diagnostics/how-to-take-my-blood-test

5. University Hospital Southampton NHS Foundation Trust. Laboratory medicine procedure G1.4: specimen rejection, revision 7 [Internet]. Southampton: UHS [cited 2026 Nov 18]. Available from: https://www.uhs.nhs.uk/Media/UHS-website-2019/Docs/Services/Pathology/Lab-med/Specimen-Rejection.pdf

6. North Bristol NHS Trust. Top ten tips for reducing sample collection errors [Internet]. Bristol: North Bristol NHS Trust [cited 2026 Nov 18]. Available from: https://www.nbt.nhs.uk/​sites/​default/​files/​Top%20​ten%20​tips%20​for%20​reducing%20​sample%20​collection%20​errors.pdf

7. North Bristol NHS Trust, BD Diagnostics. Tube guide and recommended order of draw: general wards [Internet]. Bristol: North Bristol NHS Trust; 2014 [cited 2026 Nov 18]. Available from: https://www.nbt.nhs.uk/​sites/​default/​files/​attachments/​Tube%20​Guide%20​and%20​Recommended%20​Order%20​of%20​Draw%20​-%20​General%20​Wards.pdf

8. Guy's and St Thomas' NHS Foundation Trust. How to carry out a capillary blood test [Internet]. London: Royal Brompton and Harefield hospitals; last reviewed 2025 Nov [cited 2026 Nov 18]. Available from: https://www.rbht.nhs.uk/​sites/​default/​files/​PILs/​How%20​to%20​carry%20​out%20​a%20​capillary%20​blood%20​test%20​%E2%80%93%20​November%20​2025.pdf

9. University Hospitals of North Midlands NHS Trust. Common problems affecting blood test results [Internet]. Stoke-on-Trent: UHNM [cited 2026 Nov 18]. Available from: https://www.uhnm.nhs.uk/hospitals-and-services/pathology/departments/biochemistry/common-problems-affecting-blood-test-results/

10. MedlinePlus. Hemolysis [Internet]. Bethesda (MD): National Library of Medicine (US); review date 2026 Jan 10 [cited 2026 Nov 18]. Available from: https://medlineplus.gov/ency/article/002372.htm

11. Child and Adolescent Health Service. Capillary blood sampling (heel and finger prick). Community Health Clinical Nursing Manual [Internet]. Perth: Government of Western Australia; last reviewed 2025 Sep 26 [cited 2026 Nov 18]. Available from: https://fsfhg.health.wa.gov.au/~/media/HSPs/CAHS/Documents/Community-Health/CHM/Capillary-Blood-Sampling---Heel-and-Finger-Prick.pdf

Share: